Programming discussion
Datasheet says about 10uA in deep sleep. I measure EIGHT MILLIAMPS. Battery lasted 9 days instead of the year I was bragging about!!
esp_sleep_enable_timer_wakeup(600ULL * 1000000ULL); esp_deep_sleep_start();
It definitely sleeps, the wifi stops and current drops from 80mA. Board is one of those cheap devkits from the usual place. Am I missing some magic setting
This browser holds the management token for this post.
Keep this private. Anyone with the token can resolve, edit, or delete this discussion.
There you go. A 20k divider on a 4V cell is 200uA all by itself. Go to 1M + 1M and put 100nF across the bottom resistor so the ADC has something to sample. And power the DHT from a GPIO, or a P-channel switch, so it's off during sleep.
You're measuring the board, not the chip. Those devkits have a USB-serial bridge, a linear regulator with a fat quiescent current, and a power LED. All of it stays on.
The LED! ok I can desolder the LED
That'll get you maybe 2mA back. CP2102 and the regulator are the rest. If you want the real number you need a bare module and a low Iq regulator.
For what it's worth I gave up and used a bare WROOM-32 on a small carrier with an MCP1700. It's fine for a garage sensor.
Parts came!! Bare module + MCP1700. Now reading 210uA. Better but not 10!!
What else is on the rail? Sensor? Voltage divider for the battery?
DHT22 and a divider, 10k + 10k for battery voltage. Oh no.
There you go. A 20k divider on a 4V cell is 200uA all by itself. Go to 1M + 1M and put 100nF across the bottom resistor so the ADC has something to sample. And power the DHT from a GPIO, or a P-channel switch, so it's off during sleep.
Also how are you measuring? A multimeter on the uA range has a big burden voltage. Can brown out at wake-up when it pulls 200mA through that range. If it reboots in a loop on the meter and not on the bench supply, that's why.
GOT IT. 14uA with the 1M divider and DHT on a GPIO!!! kris you are a legend. Marking this solved. Burden voltage was also real, it kept resetting until I shorted the meter during wake.
Nice. Post the numbers after a month on the battery, I'd like to see how close it gets to the sum.
Few weeks late, sorry. Anyone doing this on a newer part should look at the C3, deep sleep is about 5uA and the same board rules apply. Devkit numbers are meaningless, as above.
This discussion is resolved. Its creator can reopen it to accept more replies.